Monday, May 23, 2011

Sony DSC-P150 - Flash not working correctly

Resetting the camera worked for me (little button beside the battery).

The flash problem just started, after using this amazing little camera almost daily for 6 years:  When the camera flashes (non-red-eye) there should be 2 flashes that occur very close together. One is the pre-flash and the other is the main flash. The problem involves the Main flash not going off (only the pre-flash does).

Here is how to reset your camera. It's from Sony's self help site, but I'm posting here in case the original goes away:

How to reset a Cyber-shot® digital still camera back to original factory settings.
Solution

Cyber-shot cameras nowadays have a built-in rechargeable battery for retaining time, date, and other settings. Since the built-in rechargeable battery is not removable, current Cyber-shot camera models can only be returned to the original factory settings by pressing a small RESET button on the camera or by using an Initialize option in the menu.
Older-model Cyber-shot cameras (prior to the year 2000) do not have a built-in rechargeable battery and do not have aRESET button or Initialize option in the menu. These cameras require a manual power reset.
IMPORTANT: To determine whether or not your camera has a RESET button or Initialize option, or for other model-specific information to complete any of the steps in this solution, refer to the operating instructions supplied with the product. Manuals are available online through the Manuals/Specs/Warranty link on this page.
Follow the appropriate procedure below for your camera.
Using an Initialize option in the menu
Since Cyber-shot cameras have different menu system layouts, refer to the instruction manual specific for your camera model.
Using a RESET button
  1. Locate the RESET button on the camera.
  2. Use a pointed object (like a ballpoint pen) to press and hold the RESET button for 2-3 seconds.
  3. After 2-3 seconds has elapsed, release the RESET button.
Performing a manual power reset
  1. Turn off the camera.
  2. Remove the battery pack.
  3. Remove the button-sized lithium battery.
  4. Allow the camera to remain without power for 30 seconds.
  5. Reinsert the button-sized lithium battery.
  6. Reinsert the battery pack.
  7. Turn on the camera.
If your camera is experiencing an issue and the issue is not resolved by performing the appropriate reset procedure above, then service may be required. Click the Repair & Status link on this page for available service options.
Region
Canada
Latin America
United States
Products
Cybershot Digital Still Camera
Last Modified Date: 03-07-2011ID: C265373

Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License. This post has been scraped in violation of that license if you are reading this post on other than http://www.digital-qa.blogspot.com/.

No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...